Do you think your energy bill is too high? We agree energy prices are skyrocketing. So, if you are striving to get cheaper electricity like us, you arrived at the right place.

Here are 5 tricks you can use to cut down your electricity bill and get cheaper electricity costs each month.

1. Wash your clothes in cold water & wash full loads

For most loads, your clothes won’t get any cleaner with flamming hot water. Before doing any load of laundry, the secret to success is to check the care labels on all of your clothing. This will give you an idea of the absolute maximum temperature at which you may wash your items and help prevent catastrophe if you haven’t accurately recognized the fabric at first glance.         

The recommended wash temperature is shown by a tub-like image with dots. One dot for cool/cold, two for warm, and three for hot. If the label is illegible, keep in mind that hot water works well on ground-in and difficult-to-remove dirt on solid materials. Nonetheless, few garment care labels advise regular hot-water washing.

Here are some broad tips to get cheaper electricity when doing laundry & not ruining your clothes: 

Clothes Tips
Bright and dark colors
Cool & quick washes. Try using vinegar the first time you wash them; it will help fix the color of the clothes.
Low temperatures & gentle cycle.
If they’re not absolutely dirty, try short cold water washes. This will make them last longer.
Bed lining and towels
High temperatures are best to keep them sanitized and to avoid any bacteria growing in them.
Baby Clothes
They must be washed separately as their skin is very sensitive.

Ps. We have an entire article about saving money on laundry with 8 additional tips to get cheaper electricity bills.

2. Use appliances in off-peak hours

If you’re in a variable energy plan, you will see that electricity consumption prices tend to vary throughout the day. This comes from the amount of power used in a specific period (also known as the electrical load) that changes in generally predictable ways throughout the year.

The total hourly power load in the United States is often highest during the summer months when demand peaks in the afternoon as families and businesses utilize air conditioning on hot days. The hourly electrical usage is less variable during the winter, although it peaks in the morning and evening. Load is often lowest in the spring and fall when residences and businesses have less demand for space heating and cooling.

When you are on a variable rate, you should check if they have off-peak hour deals and adjust your consumption to those times to get cheaper electricity.

3. Turn off & unplug devices to avoid vampire energy consumption​

Halloween is officially over. However, energy vampires can still haunt you. Why? Energy vampires are one of the common causes of high electricity bills. They come in the shape of cords that are plugged even if they’re not being used, standby modes in electric appliances, air leaks, devices with a clock, and air leaks.

If you want to get cheaper electricity, make sure you avoid them as much as you can.

4. Switch to LED lightbulbs

While purchasing an LED bulb may cost a few dollars more up front, you will definitely save money in the long term. Longer bulb life means fewer bulb replacements, and less energy lost equals a cheaper electricity cost. Along with giving you cheaper electricity bills, and lowering energy costs, LEDs utilize less energy, making them safer to use in your house than traditional light bulbs, which can cause fires. There are no drawbacks to switching to LEDs.

Cool Light Bulb Facts

Have you ever noticed how cool LED light bulbs are to the touch, as opposed to incandescent bulbs, which emit a lot of heat? Because of the lack of heat, your LED lamp wastes very little energy! LEDs may function with an efficiency of up to 80%,v whereas incandescent bulbs only work at about 20%; the remaining proportion of energy in both bulbs is wasted as heat.

Ps. If you want to know more about light bulbs make sure you check out our blog post.

5. Shop around in energy marketplaces

When you compare electricity rates, the easiest way is to go to a website that makes the comparison for you. Sure, you can DIY it, but it will take you way longer, and you will probably get the same results. Just remember, before you sign up with a retailer, consider the following:

  • Read the Fact Sheet for your chosen price plan, which summarizes the essential contractual details such as terms, termination fees, and more.
  • The rate type can also give you a cheaper electricity bill.
  • The type of energy supplier. Some folks like to decide if they get a green energy rateor a non-renewable one.
  • Your supplier’s information, their lines of communication, and customer service.
  • The date when your contract ends. It is crucial, and you can find unwanted surprises if you don’t bear this in mind.
  • Rewards, or any bundled products or services’ terms and restrictions.

Having the power to choose your energy supplier, get cheaper electricity, and decide among the different marketplace is excellent. What’s even better is that you don’t have to go through all this process by yourself. We encourage you to check out our website, enter your zip code, and some basic information about your consumption. 

Whether you’re new to this situation or energy choice savvy, we want to be of help at Power Choice Now. We offer you all the information about the best time to change energy suppliers, to make sure that you have a seamless switch with no service, product, or quality change when it’s the best for you! If you switch to deregulated energy, you will have complete control over your monthly expenses and get overall cheaper electricity bills.

Go On, Be Powerful!

You will find out if there’s a rate that may benefit you more than your current one. At, finding a new energy supplier is straightforward. Reach us through our website, or call us now at 833-762-0555. One of our Power Choice Now experts will be happy to answer all your questions!

5 Responses

Leave a Reply

Your email address will not be published. Required fields are marked *